Use Fax; Send Faxes - HP DESKJET INK ADVANTAGE 4615 Guía De Inicio

Set up and use fax

Use fax

In this section, you will learn how to send and receive
faxes.

Send faxes

You can send faxes in a variety of ways. Using the
printer control panel, you can send black-and-white or
color faxes. You can also send faxes manually from
an attached phone, which allows you to speak with
the recipient before sending the fax.
You can also send documents on your computer as
faxes, without printing them first.
Send a fax from the printer control panel
1. Load your document print-side down on the
right-front corner of the scanner glass or print-side
up in the automatic document feeder (ADF).
2. From the Home screen, press the button to the
right of Fax.
3. Enter the fax number by using the keypad.
Tip: To add a pause in the fax number you
are entering, press * repeatedly, until a dash
(-) appears on the display.
Send a fax from an extension phone
1. Load your document print-side down on the
right-front corner of the scanner glass or print-side
up in the ADF.
2. From the Home screen, press the button to the
right of Fax.
3. Dial the number by using the keypad on the
phone that is connected to the printer.
Note: Do not use the keypad on the control panel
of the printer when manually sending a fax. You
must use the keypad on your phone to dial the
recipient's number.
4. If the recipient answers the telephone, you can
engage in a conversation before sending the fax.
Note: If a fax machine answers the call, you will
hear fax tones from the receiving fax machine.
Learn more!
See the user guide for more information about
the following topics:
•
Send a fax using monitor dialing
•
Send a fax from a computer
•
Send a fax from memory
•
Schedule a fax to send later
•
Send a fax to multiple recipients
For information about finding the user guide, see
"Where is the user guide?" on page 4.
4. Press the button to the right of Start Fax, and then
press the button to the right of Black or Color.
Tip: If the recipient reports issues with the
quality of the fax you sent, you can try
changing the resolution or contrast or your
fax.
Proceed to the next step to transmit the fax.
5. When you are ready to send the fax, press the
button to the right of OK, and then press the
button to the right of Black or Color.
If you were speaking with the recipient before
sending the fax, inform the recipient that they should
press Start on their fax machine after they hear
fax tones. The telephone line is silent while the fax
is transmitting. At this point, you can hang up the
telephone. If you want to continue speaking with the
recipient, remain on the line until the fax transmission
is complete.
14