Hp Eprint - HP DESKJET INK ADVANTAGE 4615 Guía De Inicio

Use the printer

HP ePrint

Note: HP ePrint is only supported by HP Deskjet
Ink Advantage 4625 e-All-in-One series.
HP ePrint is a free service from HP that allows you to
print to your HP ePrint-enabled printer anywhere you
can send an email. Just send your documents and
photos to the email address assigned to your printer
when you enable Web Services. No additional
drivers or software are needed.
Once you have signed up for an account on
ePrintCenter (www.eprintcenter.com), you can sign
in to view your HP ePrint job status, manage your
HP ePrint printer queue, control who can use the HP
Set up HP ePrint
To set up HP ePrint, complete the following steps.
Note: If you have already installed the HP
printer software, see the user guide for setup
instructions.
1. Place the HP software CD into the computer, and
then follow the onscreen instructions.
Note: If the firewall software on your
computer displays any messages during the
installation, select the "always permit/allow"
option in the messages. Selecting this option
allows the software to install successfully on
your computer.
2. Follow the instructions for your operating system:
•
Windows: When prompted, click Network
(Ethernet/Wireless), and then follow the
onscreen instructions.
•
Mac OS X: Double-click the HP Installer icon on
the software CD, and then follow the onscreen
instructions.
Note: If prompted, temporarily connect the
printer to the computer with a USB cable.
While connected, the computer sends the
wireless settings to the printer. After these
settings are sent, the installation program will
prompt you to disconnect the USB cable.
ePrint email address of your printer to print, and get
help for HP ePrint.
Note: To use HP ePrint, the printer must be
connected to the Internet using wireless
connection. You cannot use these web features if
the printer is connected using a USB cable.
Learn more!
To learn more about the Web Services Terms of
Use, visit ePrintCenter (www.eprintcenter.com).
3. If you are connecting to a wireless network, enter
the wireless network name and password (if
prompted).
4. When prompted, do the following:
•
Accept the Web Services Terms of Use.
•
Enable the printer to automatically check for
and install product updates.
•
If your network uses proxy settings when
connecting to the Internet, enter these settings.
5. After the printer prints an information page,
follow the instructions to finish the setup.
Learn more!
For more information about managing and
configuring HP ePrint settings and to learn
about the latest features, visit ePrintCenter
(www.eprintcenter.com).
6