Care Of Your Press & Refresh; Troubleshooting Guide - Shark Press & Refresh GS500 Serie Manual Del Usario

Using Your Press & Refresh
When to use the different
accessories:
1 Bristle Brush Frame – is the 3 Upholstery/Delicate Fabric
standard frame to use when Frame & Delicate Steam
Bonnet – to refresh and
steaming garments. It offers
better steam penetration for deodorize delicate items safely.
heavy fabrics without leaving
Fabric Recommendations:
water marks. Always use the
Silk, satin, embellished
bristle brush frame with the
garments.
small bonnet over the steam
TIP: When steaming a
nozzle.
delicate garment with many
Fabric Recommendations:
embellishments such as a
Cotton, wool, canvas, denim.
sequin dress, turn the garment
C AUTION: Do not use the inside out and steam from the
bristle brush on delicate fabrics. inside to deodorize and refresh.
2 4
Lint Brush Frame – use to Upholstery/Delicate
remove hair, lint and pet fur Fabric Frame & Upholstery
Steam Bonnet – refresh
while steaming your garments.
Always use the lint frame with and deodorize upholstered
the small steam bonnet over the items like sofas and chairs as
steam nozzle. well as curtains, bedding, and
mattresses
Fabric Recommendations:
Silk, polyester, cotton, wool,
rayon.
5
Small Steam Bonnet –
provides evenly distributed
steam and prevents
condensation on the garments/
fabrics.
12 TOLL FREE: 1-800-798-7398
GS500_series_IB_ES_100616.indd 12-13
- cont.
™
The small steam bonnet
should always be in place
over the steam nozzle when
steamer is in use
6 V elcro ™ Clips –
Easy detachable clips may be
used on the vertical pressing
pad for positioning garments for
steaming. They can also be used
to hold lightweight garments
directly on to the pad
7 Vertical Press Pad –
Convenient way to steam and
press garments. Eliminates the
hassle of an ironing board.
The Vertical Press Pad can be
used on any type of door and
is virtually invisible when the
door is closed for easy access
to the pad for last minute touch
ups. The Vertical Press Pad also
has web hooks on either side,
to provide convenience when
pressing sleeves and creating a
larger pressing surface.
Care of Your Press & Refresh
Cleaning & storing 5 W ipe the exterior of the fabric
steamer with a damp cloth and
1 Turn the fabric steamer "Off".
wipe dry.
2 U nplug the appliance from the
6 B undle up the power cord and
electrical outlet.
secure it with the Velcro™
3 L et the appliance cool
strap that is attached to the
completely for approximately
power cord. Always store your
30 minutes before emptying the
appliance in a cool, dry area.
water from the water tank.
4 E mpty the water from the
water tank.

Troubleshooting Guide

POSSIBLE
PROBLEM
REASONS
The steamer is not turned on.
There is no
There is not enough
steam.
water in the unit.
You are not using the steam
bonnet.
The nozzle leaves
water drops on the The steam bonnet is
garment. too wet.
The frame has condensation.
English
™
Care & use of steam nozzle
bonnets
7
T he steam bonnet is attached
to a frame on the nozzle. Gently
pull the frame off of the nozzle.
Hand wash the bonnet in cold
water with a mild detergent
after each use and let air dry
completely before using again.
Do not dry in clothes dryer.
SOLUTIONS
Verify that the blue light on the unit is lit. If not,
check that the unit is plugged in and the on/off
button is raised and in the "On" position.
Verify that the water line is above the "Refill"
line. If not, add more water to the tank.
It is recommended to use the steam bonnet on
the nozzle to prevent water drops being left on
the garment and to improve performance.
After letting the steam nozzle cool, remove the
steam bonnet and let it dry out before using
again.
Let the appliance cool and wipe the frame off.
www.sharkclean.com 13
10-06-16 11:46 AM