STEP 6. Obtain an Accurate Result in 7 Seconds
The result of your blood glucose test will appear after the meter counts to 0. This
reading will automatically be stored in the meter. Take the strip out from the meter by
hand and the meter will show "OFF" then turn off.
˙Do not push your punctured finger (with blood on it) against the test
strip or try to apply a smeared blood sample to the test strip.
˙If you do not apply a blood sample to the test strip within 3 minutes, the
meter will automatically turn off. You must remove and reinsert the test
strip to restart the test procedure.
˙The blood should be completely filled the confirmation window before
the meter begins
is not filled with blood when the meter is counting.
more blood to the test strip.
one.
˙If you have trouble filling the confirmation window, contact the Customer
Care Line at 1-888-307-8188 for help.
PLEASE NOTE
to count down. If you find that the confirmation window
Discard the test strip and retest with a new
try to add
NEVER
29