3M Scotch-Weld PUR Easy 250 Manual Del Usuario página 35

WARNING
!
Disconnect air and electrical power
and make sure applicator has cooled
to room temperature before servicing.
Failure to disconnect air and electrical
power or failure to allow applicator to
cool before servicing may cause
electrical shock or burns. Read
User's Manual before servicing.
© 3M 2014
12. Lift and rotate the housing 180 degrees clockwise so both sides are
open and all components are visible.
13. Inspect all wire connections for loose or disconnected wires by making
certain screws in all connector blocks are securing the wires properly. If
any connections are loose and have pulled out of connector blocks,
reconnect and tighten connection per wiring diagram.
3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250 Adhesive Applicator User's Manual
Connector Block
Connector Block
33