Grounding Instructions - 3M Scotch-Weld PUR Easy 250 Manual Del Usuario

Grounding Instructions

WARNING
!
Do not modify the plug provided with
the preheater or use with an adapter
or ungrounded outlet. Improper
grounding connection of the
applicator may cause electric
shock.
IMPORTANT: If the plug will
not fit the outlet, have a
qualified electrician or service
person install the proper outlet.
© 3M 2014
The 3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250 Adhesive Applicator
must be grounded. If the applicator malfunctions or breaks down, grounding provides a
path of least resistance for electric current to help reduce the risk of electric shock.
This applicator is equipped with a cord having an equipment-grounding conductor and
grounding plug. The plug must be used with an appropriate outlet that is properly
installed and grounded in accordance with all state and local codes and requirements.
Grounded
Outlet
The 3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250 Adhesive
Applicator is intended for use on a nominal 120-volt circuit and has a grounding
plug as shown in the figure above. Make sure the applicator is connected to an
outlet having the same configurations as the plug. Do not use an adapter.
3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250 Adhesive Applicator User's Manual
Grounding Pin
Grounded
Outlet Box
3