Important Safety Instructions; Scotch-Weld™ Polyurethane Reactive (Pur) Easy 250 Adhesive - 3M Scotch-Weld PUR Easy 250 Manual Del Usuario

Important Safety Instructions

3M™ Scotch-Weld™ Polyurethane Reactive
(PUR) Easy 250 or 3M™ Scotch-Weld™
Polyurethane Reactive Adhesive
For health and safety information, see product label and Material
Safety Data Sheet for 3M™ Scotch-Weld™ Polyurethane
Reactive (PUR) Easy 250 Adhesive before using.
WARNING
!
Use only with 3M™ Scotch-Weld™ Polyurethane Reactive
(PUR) Easy 250 or 3M™ Scotch-Weld™ Polyurethane
Reactive Adhesive Cartridges. Use with any other materials
may cause hazardous conditions.
WARNING
!
3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy
250 or 3M™ Scotch-Weld™ Polyurethane Reactive
Adhesive Cartridges should be preheated or used in 3M™
Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250
Adhesive Preheater or 3M™ Scotch-Weld™ (PUR) Easy
250 Adhesive Applicator only. Do not preheat 3M™
Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250 or
3M™ Scotch-Weld™ Polyurethane Reactive Adhesive
Cartridges in ovens or other heating devices or use in other
applicators. May cause hazardous conditions.
WARNING
!
Do not heat or expose 3M™ Scotch-Weld™ Polyurethane
Reactive (PUR) Easy 250 or 3M™ Scotch-Weld™
Polyurethane Reactive Adhesive to temperatures or
surfaces above 275°F (135°C). Vapors of heated material
may be irritating to eyes and respiratory tract and may
cause asthma-like symptoms in persons previously
sensitized to isocyanates.
WARNING
!
Do not clean or remove 3M™ Scotch-Weld™ Polyurethane
Reactive (PUR) Easy 250 or 3M™ Scotch-Weld™
Polyurethane Reactive Adhesive with heat, flame, or solvent.
May cause hazardous vapor or fire.
WARNING
!
Avoid Contact with flammable materials
© 3M 2014
SAVE THESE INSTRUCTIONS
Read all instructions before using this product.
3M™ Scotch-Weld™ Polyurethane Reactive
(PUR) Easy 250 Adhesive Applicator Operation
To reduce the risk of electrical shock or injury while operating
or servicing the 3M™ Scotch-Weld™ Polyurethane Reactive
(PUR) Easy 250 Adhesive Applicator, observe the following
safety rules:
1. Operate and service the applicator only as described in this
2. Connect the applicator only to a properly grounded outlet.
3. Do not unplug the applicator by pulling on the cord. Grasp
4. Do not handle the plug or applicator with wet hands.
5. Do not use the applicator outdoors or on wet surfaces.
6. Do not use the applicator with damaged cord or plug.
7. Do not use the applicator if it is not working properly or has
Use only 3-prong grounded plug and properly grounded
outlet. Failure to use properly grounded plug and outlet may
cause electrical shock.
Important: If you are not sure of proper connections, get help
from a qualified electrician or service person.
Do not use an unapproved extension cord with the applicator.
Use an extension cord which complies with NEC requirements
and state and local codes and other requirements.
3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250 Adhesive Applicator User's Manual
WARNING
!
manual.
the plug, not the cord, to unplug.
been dropped, damaged, submerged in water, or left
outdoors.
WARNING
!
WARNING
!
Important: Use only a properly rated 3-prong grounded
extension cord which complies to NEC requirements
state and local codes. Use of an improper extension cord
may cause electrical shock.
Continued on next page
1