Grounding And Ac Power Cord Connections; Tools Needed - Schumacher Electric PWI61224 Manual Del Usuario

7.

GROUNDING AND AC POWER CORD CONNECTIONS

WARNING
7.1 This battery charger is for use on a nominal 230V, 50 Hz circuit. (See the warning
label on the charger for the correct input voltage.) The plug must be plugged into
an outlet that is properly installed and grounded in accordance with all local codes
and ordinances. The plug pins must t the receptacle (outlet). Do not use with an
ungrounded system.
DANGER
7.2
a proper grounded outlet installed by a quali ed electrician. An improper connection can
result in a risk of an electric shock or electrocution.
7.3 Recommended minimum AWG size for extension cord:
100 feet (30.5 meters) long or less – use a 10 gauge (6 mm
Over 100 feet (30.5 meters) long – use an 8 gauge (10 mm
8. FEATURES
2
1
9. ASSEMBLY INSTRUCTIONS
WHEEL CHARGER ASSEMBLY INSTRUCTIONS
It is important to fully assemble your charger before use. Follow these instructions
for assembly.
Item
1 (2) axle brackets
2 (1) axle with pin holes
3 (2) wheels
4 (2) 10-32, thread cutting screws
5 (2) ¼-20, thread cutting screws
6 (1) foot
7 (2) axle caps
8 (2) hairpin cotter
9 (4) 8-18 sheet metal screws
10 (1) handle
11 (1) berglass clamp rod
12 (1) foam handle grip
RISK OF ELECTRIC SHOCK OR FIRE.
Never alter the AC cord or plug provided – if it does not t the outlet, have
3
5
7
8
PARTS
4
1. Ammeter
2. Voltmeter
3. Foam Grip
6
4. Fiber Glass Clamp Rod
5. Clamps
6. Charge Rate Selector Switch
7. Timer
8. Wheel
3/8" wrench (for mounting foot)
5/16" wrench (for mounting wheels)
1/4" wrench (for mounting handle)
hammer
screwdriver ( at blade)
screwdriver (Phillips)
5
) extension cord.
2
) extension cord.
2

TOOLS NEEDED