Sola NS PLUS 2311 Manual Del Usuario página 16

SAFETY INSTRUCTIONS
- Mount the PTO shaft's transmission only when the tractor's engine is off.
- Before connecting the PTO shaft, be sure that the danger zone surrounding
the machine is clear.
- Never leave the tractor's driver's seat while the machine is in operation.
- Do not deposit external elements inside the hopper.
- When mantaining the hydraulic system of the seed drill, make sure that it
is depressurised and the tractor's engine is off.
- Please regularly check the condition of the tubes and hosepipes in the
hydraulic system. These parts age naturally and their life should not surpass
6 YEARS. Please replace when necessary.
- When raising the seed drill, the front axle is unloaded. Ensure that the
machine has enough load to prevent it overturning. At this time you must
ensure that the condition of both the steering and the brakes is optimal.
- During transit with the raised seed drill, block the lowering switch. Before
leaving the tractor, lower the seed drill onto the ground and remove the
tractor's starting key.
- Always use enough supporting elements when maintaining the machine
in a raised position to prevent the machine from lowering or falling.
16