Sola NS PLUS 2311 Manual Del Usuario página 70

ELECTRONICAL CONTROLLER
Selecting the Tramline Sequence
1. Select the
2. Hold
me mode 1.
After 5 seconds the first two digits
flash, indicating the tramline se-
quence currently set:
'SY' = Symmetric
'AL' = Asymmetric Left
'Ar' = Asymmetric Right
'AS' = Special Asymmetric sequence e.g. 10 bout and 18 bout.
3. Continue holding the
to select the required sequance.
Setting the Tramline Bout
1. PRESS and RELEASE the
button to toggle between the
tramline sequence and tramline
bout number display.
The 3
ting the tramline bout number
currently set.
2. PRESS and RELEASE the
button to cycle the tramline bout
from 1 to 15.
channel.
to enter program-
rd th
and 4 digits flash indica-
70
button and press and HOLD the button