Fine Seeds (Microdosing) - Sola NS PLUS 2311 Manual Del Usuario

DOSAGE
5- Pinion gear nº10 must be fit into
pinion gear nº11, as shown in
figure 36.
6.2 FINE SEEDS (microdosing – Position F)
When sowing using FINE SEEDS, proceed as following:
1- Remove the safety fork (9, fig. 37).
2- Turn the spindle (4, fig. 37) to position 0 on the scale (2, fig. 37).
3- Turn the bolt (3, fig. 37) until it is inserted into axle slot, like to the picture.
2
9
36
10
3
4
11
Fig. 36 Fig. 36
Fig. 37 Fig. 37