General Characteristics; Description; Equipment Description; Electrical Panel - fluidra 65542 PROHEAT II 35KW Manual Técnico, Arranque Y Funcionamiento

PROHEAT II SERIES · AIR/WATER SYSTEM

2. GENERAL CHARACTERISTICS

2.1.

DESCRIPTION

The Air/Water heat pump is used to heat the pool basin and thereby prolong the bathing
season, by taking advantage of the energy in the air provided by the sun.
2.2.

EQUIPMENT DESCRIPTION

The heat pumps are equipped with the following components:
* Robust and lightweight design in an aluminium magnesium alloy that is resistant to solar
radiation over an aluminium frame. The colour does not deteriorate.
* High performance evaporator battery (gas-air heat sink), manufactured in copper tube with
lacquered aluminium fins that are specially designed for corrosive and coastline environments.
* Axial fan(s).
* Scroll compressor.
* G2 titanium water condensers. Guaranteed corrosion resistance.
* Coolant gas R-410-A.
* High and Low pressure switches (HP/LP).
* Expansion by thermostatic mixing valve with external balancer.
* By-flow dehydrator filter.
* Hydraulic circuit with waterflow switch at the water intake, manufactured in PVC pipe.
* Flow switch for flow control.
* Water treatment system control.
* Electrical protections for switchgear and power.
* User-friendly control panel with current temperature, setpoint and alarm messages display.
2.3.

ELECTRICAL PANEL

Electrical control panel for complete process control and to guarantee optimum performance
with minimum power consumption at all times. Containing the following components:
* Circuit breakers.
* Contactors and thermal relay.
* Interconnection and ground terminals.
* Regulator.
© FLUIDRA 2016 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT.
ENGLISH
Pag: 14