Electrical Panel; Warranty And General Conditions - fluidra 65542 PROHEAT II 35KW Manual Técnico, Arranque Y Funcionamiento

PROHEAT II SERIES · AIR/WATER SYSTEM
In the event of persistent freezing conditions, all the water treatment and heating system
components should be completely drained. Draining is performed by removing the drain plug
on the side of the condenser
FAN:
Verify the flows of the fan each year.
Clean the louvers of the fan as well as the protection grill regularly.

ELECTRICAL PANEL:

Check all electrical connections.
Verify that there is no over-heating of the electrical terminals.
Check that the safety systems are working correctly.
Verify that the thermostat or main control operates correctly and verify the temperature with
a mercury thermometer (probe calibration).
15.

WARRANTY AND GENERAL CONDITIONS

The manufacturer guarantees the quality of the equipment referred to in the LETTER OF
WARRANTY that should be delivered with this start-up and operation manual.
The manufacturer's warranty does not cover breakdowns or damage caused by the following
circumstances:
- Inadequate installation or use.
- Not following the cleaning and maintenance instructions.
- Inappropriate chemical conditions.
- Work performed by unauthorised personnel.
- Damage caused by inadequate watering.
- Damage caused by natural phenomena.
© FLUIDRA 2016 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT.
ENGLISH
Pag: 40