Electrical Connections - fluidra 65542 PROHEAT II 35KW Manual Técnico, Arranque Y Funcionamiento

PROHEAT II SERIES · AIR/WATER SYSTEM
•
When installing the machine outdoors, make sure not to place it under a steep roof
where too much rain water can fall on it.
•
The machine should not be placed 1.5 meters above or 3 meters below the water line.
•
If water from evaporator condensation appears during operation, the machine has an
opening on the side to evacuate the water.
•
Do not install the equipment in an acid or alkaline environment to avoid corrosion that
may affect the evaporator battery.
V5
.
V
V4
SYPHON
11.

ELECTRICAL CONNECTIONS

The electrical connection must be carried out by the fitter taking the following points into
account:
• Please perform the connection according to the circuit diagram included in this
manual.
© FLUIDRA 2016 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT.
ENGLISH
V1
V3
V2
V1-V2-V3: By-pass valves
V4-V5: Adjustment valves
Pag: 36