Special Listening Situations; Setting The Focus (Optional) - Siemens signia Pure primax Guia Del Usuario

Special listening situations
Setting the focus (optional)
If you want to focus more directly on your conversation
partner in front of you, or if you want to listen to the
broader environment – the spatial configurator gives you
control over your listening preference.
You can select different levels – from "focus to frontal
position" (left picture) to "middle position" (center picture)
to "hear all around" (right picture).
Prerequisites:
●
You need to wear two hearing instruments.
●
On one of your hearing instruments the rocker switch
needs to be set for the spatial configurator by your
Hearing Care Professional.
Refer to section "Controls" for the setting of the
rocker switch.
With a suitable smartphone app you have even more
control options.
22
Setting the focus manually:
If you have several hearing programs, change to
X
hearing program 1.
Press the rocker switch that is set for this function.
X
The mid level is active by default.
Press the upper rocker switch to focus more to
X
the front, or the lower rocker switch to listen to
the broader environment.
This function is intended for unique and temporary
listening situations. The hearing instruments thus return
automatically to the automatic setting of program 1 if
the sound environment changes significantly or after
approximately 45 minutes. You can also exit the spatial
configurator mode.
Exiting spatial configurator mode:
Toggle to the minimum or maximum level.
X
An optional signal tone can indicate the minimum and
maximum level.
Toggle one step further.
X
The same signal tone as for changing the hearing
program is played, indicating that you have exited
the spatial configurator mode.
23