Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
PROGRAMACIÓN
AJUSTES
PROGRAMMING
SETTINGS
TRABAJO
TASK
LANGUAGE
DATE
PRINTER
UNITS
PROBE
WATER
SETUP
SELECT LANGUAGE:
ENGLISH
SETUP > LANGUAGE
POINT TO SET TIME / DATE
TIME
15
:
01
DATE
11
/
05
/
SETUP > FECHA / HORA
NO
ACTIVATE
PRINTER
1 min
PRINTER
INTERVAL
PRINTER FEED
SETUP > FECHA / HORA
PROBE
INTERNAL
SETUP > SONDA
TEMPERATURE
UNITS.
ºC
SETUP > UNITS
J
.P. SELECTA s.a.u.
CODE 80330 REV B
7.5
Setting operation parameters as: Language, temperature units, ...
Point over «SETTINGS».
Point over the parameter to modify
ENTRY
PASSWORD
CHANGE
PASSWORD
Press
parameters.
CAL
BACK
HH:MM:SS DD/MM/YY
7.5.1
Set language between:
Press
BACK
parameters.
HH:MM:SS DD/MM/YY
7.5.2
Press over icons to modify day, month, ...
15
Press
BACK
parameters.
HH:MM:SS DD/MM/YY
7.5.3
Enables the record on the printer (or USB) recorder.
Printer Feed» Feed printer paper.
Press
parameters.
BACK
HH:MM:SS DD/MM/YY
7.5.4
Internal probe: The autoclave controller takes the vessel water temperature
to control the cycle.
External probe: (accesory). Also called «heart probe» , the autoclave takes
the sample temperature to control the cycle.
BACK
Press
HH:MM:SS DD/MM/YY
parameters.
7.5.5
Choose units between ºC or ºF.
Press
BACK
parameters.
HH:MM:SS DD/MM/YY
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
September 2017 (It can be modified without notice)
Setting parameters
to retun to main menu or press
Language:
to retun to main menu or press
Date and time:
to retun to main menu or press
Printer:
to retun to main menu or press
Select internal or external (heart) probe:
to retun to main menu or press
Temperature units:
to retun to main menu or press
to modify other
BACK
Spanish.
English.
French.
to modify other
BACK
to modify other
BACK
to modify other
BACK
to modify other
BACK
to modify other
BACK
Tel 34 93 770 08 77 Fax 34 93 770 23 62
Page: 26
Publicidad
Tabla de contenido
