Alarm History - Nuova Simonelli AURELIA II Digit Manual Del Usuario

The second table shows the total for groups,
washing, services and absolute total:
Total grp
6 6 6 6
Washes 7 1
Total
18 4 4 1 1
The different fields in the two tables can be
deleted using the delete mode.
The delete mode is entered by pressing and
holding down the wash button
seconds.
Once in this mode, the table will contain a red
rectangle showing the value that can be deleted.
Use the rotary switch to select the field to be
deleted and press the rotary switch again to
delete it.
Total grp
6 6 6 6
Washes 7 1
Total
18 4 4 1 1
To quit the delete mode, press the wash button
again.
To quit the count mode, press the rotary switch
again and then select or
Menu
7.2.7 ALARMS
Use the rotary switch to select "Alarms" and
press to open:
3 3
6
2
Language Language
Energy Energy
saving
Two options will be displayed:
. for a few
Alarms Alarms
history history
Icon
3 3
6
2

ALARM HISTORY

This function serves to view the history of con-
trol unit alarms:
.
Home
Cup warmer probe 1 error
Pressure error
Group dose error 1
Group dose error 2
Group dose error 1
Main Menu
Temperatu Temperature emperature ure u ure Key Key and display Key and display y and displ and disp
Dose Dose
setpoint setpoin t s settings settings
programming programm ming ming
Pour Pour Te Technical echnical
Alarms Alarms
count settings se ettings
Alarms
washing washing w
allarm a llarm
Description
Alarm history
Wash alarms
:
Error found
Turn the rotary switch to navigate through the
two pages with the list of errors stored in the
control unit.
To delete the alarm history, press the wash but-
ton . on the control panel and hold it
down for 3 seconds.
To quit, press the rotary switch again and then
select or .
Menu Home
WASH ALARMS:
This function serves to set the timer (hours and
minutes) for the group wash alarm.
E.g. setting 1 h and 30 min., will cause the
machine to send a wash alarm message after
1h and 30 min.
It is possible to access this function pressing the
rotary switch. Use the rotary switch to select
from the ACTIVE and NON ACTIVE modes.
Selecting NON ACTIVE
ry switch will return to the main menu.
Selecting ACTIVE it is then necessary to
use the rotary switch to set the hours and min-
utes after which the alarm message appears.
After the minutes have been set, the machine
returns to the main menu.
hh mm
03 30
using the rota-
63