Maintenance And Storage; Technical Specifications; Reference To Standards - Gima DAYTON Guía De Uso

15

MAINTENANCE AND STORAGE

With proper care and maintenance, your blood pressure kit will provide years
of satisfactory service. The basic rules:
• Do not strike or drop.
• Never inflate over 300mmHg.
• Never expose the product to intensive solar radiation directly.
• Never touch the cuff fabric or parts with a sharp instrument, since this
could cause damage.
• Always deflate cuff completely before storage.
• Do not dismantle manometer under any circumstances.
• Store all instrument in storage case provided to keep the chestpiece
and all the other parts clean.
• Storage temperature condition: -20°C to 70°C at relative air humidity
of 85% (non-condensing).
• Wipe off the manometer and bulb with a damp cloth.
Sterilization is not necessary, since the parts do not come into direct
contact with the patient's body.
• Remove the bladder first, and wipe the velcro, bladder and tubes
with a damp cloth. The cuff can be washed with soap and cold water like
all the other cuffs, but you must rinse the cuffs with clear water afterwards
and let them air dry.

TECHNICAL SPECIFICATIONS

Feature
Scale range
Measuring range
Scale graduation
Accuracy
Air leakage
Operating condition
Storage condition

REFERENCE TO STANDARDS

Device corresponds to below requirements:
EN1060-1: 1996 / EN1060-2: 1996
ANSI / AAMI SP9
ENGLISH
Specification
0-300 mmHg
0-300 mmHg
2 mmHg
±3 mmHg
<± 4mmHg/min
Temperature
Humidity
Temperature
Humidity
+10°C to +40°C
20% to 85%
-20°C to +70°C
20% to 85%