Erasing Data; Storage And Maintenance; General Use - Gima 32926 Manual Del Usuario

D. To stop reading memories, press
and switch to Standby Mode.

Erasing data

+
A. Press button to select User 1, 2, or 3.
B. Press M button to enter Memory Mode.
C. Press and hold
the data will be erased automatically.
D. To confirm the data in the selected user has been erased,
press M button and no data should appear.
Note: Once deleted, your data can NOT be restored.

storaGE and maIntEnancE

General Use

• Do not in any way twist the cuff.
• Do not press button if the cuff is not wrapped around the wrist.
• Do not drop the product and avoid any strong impacts.
maintenance
• Use a piece of cloth with water or mild cleansing agent to wipe the device and dry it immediately
with a dry cloth.
• Do not use detergent or any strong chemicals to clean the device.
• Use only a dry cloth to wipe the cuff.
• Do not attempt to disassemble or change any parts of the monitor, including wrist cuff,
due to substitution of a component different from that supplied might result in measurement error.
• If any suggestion or service is requested, please consult your service station.
storage
• If the device is not to be used for a long time, please remove the batteries from the device
(leaking of battery acid can cause the device to malfunction).
• Always store the unit in the storage case after use.
• Do not place the device directly under sunlight, in high temperature, or in humid or dusty places.
• Do not store the device in extremely low (less than -13°F/-25°C) and high (more than 158 °F/70 °C)
temperature, nor in a place its humidity exceeds 93% R.H.
ENGLISH
button,
+
and buttons at the same time,
36