Disposal - RIDGID K-5208 Manual Del Usario

K-5208 Drain Cleaning Machine
Cables and Leaders
Catalog Model
No. No. Description
62280 C-11 1 1 / " (32 mm) x 15' (4,6 m) Standard All-Purpose
4
Wind. 3 ⁄ " (10 mm) Pitch. Good for 4" (110 mm)
8
Traps, 3" (75 mm) - 8" (200 mm) Lines
24226 C-11 PC 1 1 / " (32 mm) x 15' (4,6 m) Standard All-Purpose
4
Wind 3 ⁄ " (10 mm) Pitch with Plastic Core, Good For
8
4" Traps
62285 C-12 1 1 / " (32 mm) x 15' (4,6 m) Extra-Heavy-Duty Wind.
4
3 ⁄ " (10 mm) Pitch. Recommended For 4" (110 mm) -
8
10" (250 mm) Long Runs, No 4" (110 mm) Traps
62295 C-14 1 1 / " (32 mm) x 15' (4,6) Heavy-Duty Wind.
4
Pitch. Recommended For 3" (75 mm) - 10" (250 mm)
Through Cleanout, No 4" (110 mm) Traps
62300 C-15 1 1 / " (32 mm) x 15' (4,6) Extra-Flexible Wind.
4
Pitch. Recommended For 3" (75 mm) - 6" (150 mm)
Lines. Good for Traps
63090 T-27 1 1 / " (32 mm) x 25" (63,5 cm) Leader
4
62275 C-10 7 / " (22 m) x 15' (4,6 m) All-Purpose Wind
8
Recommended for 2" (50 mm) – 4" (100 mm) Lines
25036 C-10 PC 7 ⁄ " (22 mm) x 15' (4,6 m) Cable with Inner Core
8
Recommended for 2" (50 mm) – 4" (100 mm) Lines
Tools – 1¼" (32mm) Cable
Catalog Model
No. No. Description
59480 T-11 "H" Cutter, 2
59485 T-12 "H" Cutter, 3
61770 T-15A Expanding Cutter, 4" - 6" (110-150 mm)
61790 T-4 Heavy-Duty Funnel Auger
61800 T-2 Heavy-Duty Straight Auger
61825 T-15B Expanding Cutter, 6" - 8" (150-200 mm)
61970 T-13 Sawtooth Cutter, 2
61975 T-14 Sawtooth Cutter, 3
62840 T-1 Straight Auger
62845 T-10 Grease Cutter, 4
63105 T-3 Funnel Auger
63190 T-5 Straight Retrieving Auger
63195 T-6 Funnel Retrieving Auger (Run Machine In Reverse)
63200 T-7 Hook Auger
63205 T-8 Grease Cutter, 2
63210 T-9 Grease Cutter, 3
59625 T-21 Spiral Sawtooth Cutter, 2
59765 T-24 4-Blade Cutter, 2
59770 T-25 4-Blade Cutter, 3
59775 T-26 4-Blade Cutter, 4
59780 T-26A 4-Blade Cutter, 5
61850 T-17 Spiral Bar Cutter, 6" (150 mm)
61855 T-18 Spiral Bar Cutter, 8" (200 mm)
61960 T-16 Spiral Bar Cutter, 4" (110 mm)
63075 T-22 Spiral Sawtooth Cutter, 3" (75 mm)
63085 T-23 Spiral Sawtooth Cutter, 4" (110 mm)
63110 T-31 Chain Knocker, For 3"- 4" Pipe (75-110 mm)
63115 T-32 Chain Knocker, For 6" Pipe (150 mm)
63120 T-33 Chain Knocker, For 8" Pipe (200 mm)
98030 T-50 Shark Tooth Cutter, 3 Sizes: 3-4-5" (75-110-127 mm)
98035 T-50-1 Sharktooth Cutter, 3" (75 mm)
98040 T-50-2 Sharktooth Cutter, 4" (110 mm)
98045 T-50-3 Sharktooth Cutter, 5" (127 mm)
18
1 / " (13 mm)
2
1 / " (13 mm)
2
1 / " (65 mm)
2
1 / " (89 mm)
2
1 / " (65 mm)
2
/ " (89 mm)
1
2
1 / " (114 mm)
2
1 / " (65 mm)
2
1 / " (89 mm)
2
1 / " (65 mm)
2
/ " (65 mm)
1
2
1 / " (89 mm)
2
1 / " (114 mm)
2
1 / " (140 mm)
2
Tools – 7 / " (22mm) Cable
8
Catalog Model
No. No. Description
62850 T-101 Straight Auger
62855 T-102 Funnel Auger
27642 T-125 Retrieving Auger
62860 T-103 Sawtooth Cutter, 2
62865 T-104 "H" Cutter, 2
62870 T-105 Grease Cutter, 2
62875 T-106 Grease Cutter, 3
62915 T-109 Spiral Sawtooth Cutter, 1
62920 T-110 Spiral Sawtooth Cutter, 2
62925 T-111 Spiral Sawtooth Cutter, 3" (75 mm)
62930 T-112 4-Blade Cutter, 1
62935 T-113 4-Blade Cutter, 3" (75 mm)
62940 T-114 Chain Knocker for 4" lines
98050 T-150 Sharktooth Cutter, 3" (75 mm) and 4" (110 mm)
98055 T-150-1 Sharktooth Cutter, 3" (75 mm) Blade
98060 T-150-2 Sharktooth Cutter, 4" (110 mm) Blade
62880 T-107 Spade Cutter, 1
54842 T-141 Knife Blade Cutter 1
54852 T-142 Knife Blade Cutter 2
For a complete listing of RIDGID equipment available for
these tools, see the Ridge Tool Catalog online at
RIDGID.com or see Contact Information.

Disposal

Parts of these tools contain valuable materials and can be
recycled. There are companies that specialize in recycling
that may be found locally. Dispose of the components in
compliance with all applicable regulations. Contact your
local waste management authority for more information.
For EC Countries: Do not dispose of elec -
trical equipment with household waste!
According to the European Guideline 2012/ -
19/EU for Waste Electrical and Electronic
Equipment and its implemen tation into na-
tional legislation, electrical equipment that is
no longer usable must be collected separately and dis-
posed of in an environmentally correct manner.
1 / " (65 mm)
2
1 / " (65 mm)
2
1 / " (65 mm)
2
1 / " (87 mm)
2
/ " (45 mm)
3
4
1 / " (57 mm)
4
3 / " (45 mm)
4
3 ⁄ " (45 mm)
4
/ " (40 mm)
1
2
1 / " (65 mm)
2
999-995-137.10_REV. B