Disposal - RIDGID K-400 Manual De Instrucciones

K-400 Drain Cleaning Machine
should only be handled by an authorized
RIDGID service technician.
Tool should be taken to a RIDGID Authorized
Inde pend ent Service Center or returned to
the factory. Only use RIDGID service parts.
For information on your nearest RIDGID
Authorized In depen dent Service Center or
any service or repair questions:
• Contact your local RIDGID distributor.
• Visit RIDGID.com to find your local RIDGID
contact point.
• Contact Ridge Tool Technical Service De -
partment at rtctechservices@emerson.com,
or in the U.S. and Canada call (800) 519-
3456.

Disposal

Parts of the K-400 Drain Cleaning Machine
contain valuable materials and can be recy-
cled. There are companies that specialize in
recycling that may be found locally. Dispose of
the components and any waste oil in compli-
ance with all applicable regulations. Contact
your local waste management authority for
more information.
For EC Countries: Do not dis-
pose of electrical equipment with
household waste!
According to the European Guide -
line 2012/ 19/ EU for Waste Electri cal
and Electronic Equip ment and its
implemen tation into national legislation, elec-
trical equipment that is no longer usable must
be collected separately and disposed of in an
environmentally correct manner.
18
999-998-156.09_REV. E