Kärcher MV 5 Manual De Instrucciones página 18

Position 0: The appliance is

switched off. Electric tool is sup-
plied with voltage.
Machine socket
Note: Observe the maximum connect-
ed load (see Chapter "Technical da-
ta").
Illustration
To connect an electric tool.

Blowing connection
Illustration
Connect the suction hose to the

blower connection, this will activate
the blower function.
Filter cleaning button
Illustration
For cleaning the flat pleated filter fit-

ted.
Note: Do not operate the button when
the flat pleated filter is wet.
Recessed grip
After unlocking it, grab the appli-

ance head by the handle recess
and remove it.
Carry handle
Illustration
The carrying handle is also used to

lock the appliance head and the
container. To unlock, push the bow
all the way forward until you clear
the lock.
Grab the appliance head by the

handle recess and remove it.
Filter box and release key
Illustration
Illustration
H
2
In order to clean the filter, press the

release key, fold out and remove
the filter box.
18
Accessory mount
Illustration
The accessories compartment al-

lows the storage of suction pipes
and suction nozzles on the appli-
ance.
Cable hook
Illustration
To store the mains cable.

Parking position
Illustration
To rest the floor nozzle during work

interruptions.
Steering roller
Illustration
Turn the container, press in the

steering roller in the openings at the
base of the container till the end-
point.
Drain screw
Illustration
The drain screw is used to quickly

and comfortably empty wastewater
in the container. Tilt the container
forward for easier emptying.
Filter bag
Illustration
Note: Do not use a filter bag for wet
vacuuming!
Flat fold filter
(already installed in the appliance)
CAUTION
Always work with an inserted flat fold
filter - during wet as well as dry vacuum
cleaning!
– 8
EN