Operation; Before Startup - Kärcher MV 5 Manual De Instrucciones

Suction hose with connecting
piece
Illustration
Push the suction hose into the con-

nection on the appliance, it snaps in
place.
In order to disconnect it, push down

with your thumb and pull the suction
hose out.
Note: Accessories, such as suction
brushes (optional) can be directly at-
tached to the connecting piece and
thus connected to the suction hose.
For convenient working even in tight
spaces.
The removable handle can be attached
between the accessories and the suc-
tion hose if necessary.
See position 17.
Recommendation: In order to vacu-
um the floor, attach the handle to the
suction hose.
Removable handle
Illustration
Connect the handle with the suction

hose until it snaps in place.
Illustration
To remove the handle from the suc-

tion hose, press the notch using
your thumb and pull off the handle.
Note: Due to removing the handle, ac-
cessories can be directly attached to
the suction hose.
Recommendation: In order to vacu-
um the floor, attach the handle to the
suction hose.
Suction tubes 2 x 0.5 m
Illustration
Put both suction tubes together and

connect them with the handle.
Floor nozzle
(with switching lever)
Illustration
For convenient switching between dry
and wet dirt:
For vacuuming dry dirt off the floor,

use position with extended brush
strips.
For vacuuming water off the floor,

use position with extended rubber
lips.
Crevice nozzle
For edges, joints, heaters and hard

to reach locations.
Adapter
Illustration
To connect the suction hose with an

electric tool
Adapt the adapter to the connection

diameter of the electric tool using a
knife if necessary.
Flexible tool hose
Illustration
For more flexibility when working

with electric tools.
Note: Can also be used with an
adapter.
CAUTION
Always work with an inserted flat
fold filter - during wet as well as
dry vacuum cleaning!

Before Startup

Illustration
Remove the appliance head and

take the contents out of the contain-
er.
Turn the container, press in the

steering roller in the openings at the
– 9
EN

Operation

19