Victron energy MPPT 150/70-Tr VE.Can Manual De Instrucciones página 25

6. Specifications, 250V models
SmartSolar charge
controller
Battery voltage
Maximum battery current
Nominal PV power, 12V 1a,b)
Nominal PV power, 24V 1a,b)
Nominal PV power, 36V 1a,b)
Nominal PV power, 48V 1a,b)
Max. PV short circuit current 2)
Maximum PV open circuit
voltage
Peak efficiency
Self consumption
Charge voltage 'absorption'
Charge voltage 'float'
Charge voltage 'equalization'
Charge algorithm
Temperature compensation
Protection
Operating temperature
Humidity
Maximum altitude
Environmental condition
Pollution degree
Data communication port
Remote on/off
Relay (programmable)
Parallel operation
Colour
PV terminals 3)
Battery terminals
Protection category
Weight
Dimensions (h x w x d)
Safety
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter the minimum PV voltage is Vbat + 1V.
2) A higher sort circuit current may damage the controller in case of reverse
polarity connection of the PV array.
3) Default setting: OFF
4) MC4 models: several splitter pairs may be needed to parallel the strings of solar panels
MPPT 250/70
12/24/48V Auto Select (36V: manual)
70A
1000W
2000W
3000W
4000W
35A (max 30A per MC4
250V absolute maximum coldest conditions
245V start-up and operating maximum
Less than 35mA @ 12V / 20mA @ 48V
Default setting: 14,4V / 28,8V / 43,2V / 57,6V (adjustable)
Default setting: 13,8V / 27,6V / 41,4V / 55,2V (adjustable)
Default setting: 16,2V / 32,4V / 48,6V / 64,8V (adjustable)
multi-stage adaptive
-16mV/°C / -32mV/°C / -64mV/°C
Battery reverse polarity (fuse, not user accessible)
PV reverse polarity / Output short circuit / Over temperature
-30 to +60°C (full rated output up to 40°C)
5000m (full rated output up to 2000m)
CAN, VE.Direct or Bluetooth
DPST AC rating: 240VAC / 4A
ENCLOSURE
35 mm² / AWG2 (Tr models)
Two pairs of MC4 connectors (MC4 model 250/70)
Three pairs of MC4 connectors (MC4 models 250/85 and 250/100)
IP43 (electronic components)
3 kg
Tr model: 185 x 250 x 95 mm
MC4 model: 215 x 250 x 95 mm
STANDARDS
EN/IEC 62109-1, UL 1741, CSA C22.2
23
MPPT
250/85
85A
1200W
2400W
3600W
4900W
70A (max 30A per MC4
99%
(eight preprogrammed algorithms)
or user defined algrithm
95%, non-condensing
Indoor, unconditioned
PD3
Yes (2 pole connector)
DC rating: 4A up to 35VDC, 1A up to 60VDC
Yes (not synchronized)
Blue (RAL 5012)
35 mm² / AWG2
IP22 (connection area)
Tr models: 216 x 295 x 103 mm
MC4 models: 246 x 295 x 103 mm
MPPT
250/100
100A
1450W
2900W
4350W
5800W
4,5 kg