Safety; Safety Precautions For The Operator - Wilo Drain LP 40 Instrucciones De Instalación Y Funcionamiento

2 Safety

These instructions contain important information which must be followed when
installing and operating the pump. These operating instructions must therefore be read
before assembly and commissioning by the installer and the responsible operator.
Both the general safety instructions in the "Safety precautions" section and those in
subsequent sections indicated by danger symbols should be carefully observed.
2.1 Indication of instructions in the Operating Instructions
Safety precautions in these operating instructions which, if not followed, could cause
personal injury are indicated by the symbol:
when warning of electrical voltage with
The following symbol is used to indicate that by ignoring the relevant safety
instructions, damage could be caused to the pump/machinery and its functions:
2.2 Staff training
The personnel installing the pump must have the appropriate qualifications for
this work.
2.3 Risks incurred by failure to comply with the safety precautions
Failure to comply with the safety precautions could result in personal injury or
Damage to the pump or installation. Failure to comply with the safety precautions
could also invalidate any claim for damages.
In particular, lack of care may lead to problems such as:
 Failure of important pump or machinery functions,
 Personal injury due to electrical, mechanical and bacteriological causes.

2.4 Safety precautions for the operator

Existing regulations for the prevention of accidents must be followed.
Dangers caused by electrical energy are to be excluded. Directives issued by the
VDE [German Association of Electrical Engineers] and the local electricity supply
companies are to be observed.
,
ATTENTION!
- 11 -
ENGLISH