Applying The Cuff - HoMedics BPW-360BT Manual Del Usario

Note:
• For use with iPhone ® 5, iPhone
(3rd generation).
• The App must be open on your mobile device in order
to establish a connection with the monitor.
®
• Bluetooth must be turned ON on your mobile device.
• The App will only receive new readings from the
monitor. The App will not store or display duplicate
measurements.
• Consult with your mobile device manufacturer to
ensure you are using a Bluetooth
device. Only Bluetooth
work with the HoMedics
Pressure Monitor.
® 4S, and iPad ®
®
Smart mobile
® Smart mobile devices can
® Premium Wrist Blood
15

APPLYING THE CUFF

1. R emove all watches, wrist jewelry, etc.
prior to attaching the wrist monitor.
Clothing sleeves should be rolled up
and the cuff should be wrapped around
bare skin for correct measurements.
2. Apply cuff to left wrist with palm facing
up as shown in Fig. A.
3. Make sure the edge of the cuff is about
1/4"~1/2" (1 cm) from the palm as
shown in Fig. B.
4. In order to ensure accurate
measurements, fasten the hook and
loop strap securely around your wrist so
there is no extra space between the cuff
and the wrist. If the cuff is not wrapped
tight enough, the measurement values
will not be accurate.
5. I f your physician has diagnosed you
with poor circulation in your left arm,
place the cuff around your right wrist as
shown in Fig. C.
Note:
If it is not possible to use the cuff on your
left wrist, it can also be used on your right
wrist. However, all measurements should
be made using the same wrist.
Fig. A
Fig. B
Fig. C
16