Playing Tracks In Random Order; Scanning Folders And Tracks - Pioneer DEH-30MP Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MP3/WMA/WAV Player
2
Press c or d to select the repeat range.
Press c or d until the desired repeat range ap-
pears in the display.
! RPT:DSC  Repeat all tracks
! RPT:TRK  Repeat just the current track
! RPT:FLD  Repeat the current folder
Notes
! If you select another folder during repeat play,
the repeat play range changes to RPT:DSC.
! If you perform track search or fast forward/re-
verse during RPT:TRK, the repeat play range
changes to RPT :FLD.
! When RPT:FLD is selected, it is not possible
to play back a subfolder of that folder.
! If you select RPT:FLD and then return to the
playback display, FRPT appears in the dis-
play.

Playing tracks in random order

Random play lets you play back tracks in a
random order within the repeat range,
RPT :FLD and RPT:DSC.
1
Select the repeat range.
Refer to Repeating play on the previous page.
2
Press FUNCTION to select RDM.
Press FUNCTION until RDM appears in the
display.
3
Press a to turn random play on.
RDM :ON appears in the display. Tracks will
play in a random order within the previously
selected RPT:FLD or RPT :DSC ranges.
4
Press b to turn random play off.
RDM :OFF appears in the display. Tracks will
continue to play in order.
Note
If you turn random play on during RPT:FLD and
then return to the playback display, FRDM ap-
pears in the display.

Scanning folders and tracks

While you are using RPT :FLD, the beginning
of each track in the selected folder plays for
about 10 seconds. When you are using
RPT :DSC, the beginning of the first track of
each folder is played for about 10 seconds.
1
Select the repeat range.
Refer to Repeating play on the previous page.
2
Press FUNCTION to select SCAN.
Press FUNCTION until SCAN appears in the
display.
3
Press a to turn scan play on.
SCAN :ON appears in the display. The first 10
seconds of each track of the current folder (or
the first track of each folder) is played.
4
When you find the desired track (or
folder) press b to turn scan play off.
SCAN :OFF appears in the display. The track
(or folder) will continue to play.
# If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.
Notes
! After track or folder scanning is finished, nor-
mal playback of the tracks will begin again.
! If you turn scan play on during RPT:FLD and
then return to the playback display, FSCN ap-
pears in the display.
Section
07
23
En

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido