DITEC 99 Manual De Instalación página 17

4. DOORS REQUIREMENTS FOR HANDICAPPED PERSONS USE
If the WEL is used on doors for use also by handicapped per-
sons, set DIP6=ON.
In this way the adjustments are changed as shown in the table.
When you use the opening for disabled persons control (H-3A
and H-3B), the door open time is extended by 30 s as compa-
red with the TC setting.
Adjust the RF motor force so as to obtain a reading of any ob-
stacles in the door's path.
Adjust the VA (opening) and VC (closing) so that the opening
and closing times (excluding slow-down) are the same as or
greater than those indicated in the following table.
In the case of WELS, reduce the spring's closing force as indi-
cated in the WEL manual, and adjust the closing speed (with no
power) as explained in chapter 3.
Door wing length
750 mm
850 mm
1000 mm
1200 mm
Perform also the adjustments indicated in figure:
OPENING
~ 80° (FA)
50 kg 60 kg
3 s 3.1 s
3.1 s 3.1 s
3.2 s 3.4 s
3.8 s 4.2 s
VA adjustment
Description
VA Opening speed
Opening time
VC
Closing speed
Closing time
TC Automatic closure time
RF Motor torque
Door wing weight
70 kg
3.2 s
3.2 s
3.7 s
4.5 s
Attendere / Wait for ≥ 5 s
10° (FC)
17
MIN
4°/s
22 s/90°
4°/s
22 s/90°
5 s
60%
80 kg 90 kg
3.3 s 3.5 s
3.4 s 3.6 s
4 s 4.2 s
4.8 s 5.1 s
CLOSING
VC adjustment
t≥1,5 s
99 - IP1786
GB
MAX
44°/s
2 s/90°
44°/s
2 s/90°
30 s
100%