Festo DNCV Serie Instrucciones De Utilizacion página 23

DNCV-...
Select the fitting variant to suit your application.
S
Further fitting possibilities for Fig. 6 are described in the Festo catalogue and
the necessary accessories are described in the chapter "Accessories."
Variants (examples)
With foot fastening type HNC-...
Fig. 6
Tighten the fastening screws to an equal extent.
S
The tightening torques are shown in the table below:
Type
Tightening torque
Size
Fig. 7
Fasten the work load to the piston rod.
S
Take into account here the maximum per-
mitted forces and torques (see "Technical
specifications").
Festo DNCV-... 0207a English
With swivel fastening type SNC-...
DNCV-32-... DNCV-40-... DNCV-50-... DNCV-63-...
4 Nm 5 Nm
M6 M6
Fig. 8
8 Nm 8 Nm
M8 M8
23