Introduction; Intended Use / Indications For Use; Important Labels And Indicators - Ecolab IntraTemp Manual Del Operador

CAUTION: Federal Law (USA) restricts this device to sale by or on the order of a physician.

1. INTRODUCTION

1.1 INTENDED USE / INDICATIONS FOR USE The IntraTemp™ Solution Warmer (ITW6L) is designed to warm
and maintain the temperature of surgical solutions prior to their use.
CONTRAINDICATIONS: The IntraTemp Solution Warmer is NOT intended for use as a blood warmer, as a
1.2
tissue bath, or as a patient (e.g., an infant) bath.
1.3

IMPORTANT LABELS AND INDICATORS

• Digital Temperature Display and Green Power-On Light beside Basin.
• Digital Temperature Displays above each Bottle Pocket.
• Power Switch- "l" ON, "0" OFF.
• Serial Number & Ratings found beside power switch on lower rear of the IntraTemp cabinet.
• Explanation of Labels:
Symbol
No Direct Patient
Contact with
Heating Unit!
Meaning
Electric Shock Hazard
Hot Surface
No Patient Should Touch The
Unit!
Protective Earth
Caution
3rd Party IEC 60601-1 3rd
Edition Certification Listing
CE Mark
Symbol for marking of
Electrical and Electronic
Equipment (EEE).
Manufacturer
Date of Manufacture
The front panel should not be removed. No user serviceable
parts inside.
Burn Hazard. Allow this surface to cool before cleaning.
Direct patient contact is contraindicated! The IntraTemp™ is
not intended as a blood warmer, tissue bath, or patient bath.
Source of Earth Ground for the device.
Caution Sign Adjacent to Basin Heater and Bottle Pocket-
further warning that the heater surface may be hot.
Caution Sign Adjacent to Rating Label - use only
specified fuse.
Located on Rating Label - Certified that IntraTemp
conforms to IEC 60601-1 3rd Edition Standard as tested by
a 3rd Party Laboratory.
Located on Rating Label - Indicates that IntraTemp conforms
to European Union Directives
Located on Rating Label - Disposal of Old Electrical &
Electronic Equipment (Applicable in the European Union
and other European countries with separate collection
systems)
This symbol on the product or on its packaging indicates
that this product shall not be treated as household waste.
Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product.
ECOLAB has contracted with one or more recycling/disposal
companies in each EU Member State, Please contact your
ECOLAB contact for recycling/disposal information.
Located on Rating Label
3 of 128
Application