Warnings And Precautions; Specifications - Ecolab IntraTemp Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
Symbol
1.4

WARNINGS AND PRECAUTIONS

• NO DIRECT PATIENT CONTACT! DO NOT PLACE A PATIENT (e.g., an infant) OR ANY PART OF A
PATIENT INTO, ON, OR AGAINST THE IntraTemp OR INTO DIRECT CONTACT WITH THE WARMING
PLATE LOCATED IN THE UPPER BASIN RECEPTACLE. PROLONGED CONTACT WITH HEATING
SYSTEMS MAY CAUSE THERMAL INJURY.
• IF THE WARMER IS POWERED ON WITH A THERMABASIN INSTALLED, THE BASIN HEATING PLATE
WILL HEAT UP EVEN IF NO FLUID IS POURED INTO THE BASIN. WITHOUT FLUID IN THE BASIN,
THE THERMABASIN HEATING PLATE MAY BECOME HOT ENOUGH TO CAUSE THERMAL INJURY.
DO NOT OPERATE WITHOUT A MINIMUM OF 1.5 LITERS OF SOLUTION IN THE THERMABASIN.
• THE BOTTLE POCKET HEATED ACCESS SLEEVES ARE ALWAYS HEATING WHEN POWER IS ON.
CARE SHOULD BE TAKEN TO NOT TOUCH THE INTERIOR METAL SURFACES AS THEY CAN BE
HOT. OBJECTS OTHER THAN SALINE BOTTLES OR BAGS SHOULD NEVER BE PLACED IN THE
POCKETS
• POSITION INTRATEMP TO ALLOW EASY REMOVAL OF POWER CORD FROM POWER OUTLET.
POWER CORD MUST BE DISCONNECTED FROM OUTLET TO ISOLATE INTRATEMP FROM
EXTERNAL POWER SUPPLY.
• ELECTRIC SHOCK HAZARD- DO NOT REMOVE PROTECTIVE PANELS. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
• RISK OF FIRE. REPLACE FUSE AS MARKED:
• CANADA AND US: GROUNDING RELIABILITY CAN ONLY BE ACHIEVED WHEN THIS EQUIPMENT
IS CONNECTED TO AN EQUIVALENT RECEPTACLE MARKED "HOSPITAL ONLY" OR "HOSPITAL
GRADE"
• INTRATEMP IS DESIGNED FOR USE BY TRAINED HEALTHCARE PROFESSIONALS.
• INTRATEMP IS DESIGNED FOR USE IN INDOOR AMBIENT TEMPERATURE AND HUMIDITY
CONDITIONS. (10-40 °C; 30-75 %RH).
• WARNING: DO NOT TRANSPORT FULLY LOADED AT AN INCLINE GREATER THAN 5°.
• INTRATEMP IS NOT DESIGNED FOR USE IN AN OXYGEN RICH ENVIRONMENT.
• INTRATEMP IS NOT DESIGNED FOR USE IN THE PRESENCE OF FLAMMABLE ANESTHETICS.
• WARNING: NO MODIFICATION OF THIS EQUIPMENT IS ALLOWED.

2. SPECIFICATIONS

• Power: 120 Volt AC, 60Hz, 5 Amps/230V AC, 50Hz, 2.6 Amps.
• Voltage Sense Circuit Software Revision: ITW6L-_-MSIBOARD.X.PRODUCTION.hex
Meaning
Authorized Representative in
the European Community
Catalog Number
Serial Number
Follow Instructions for Use
Fuse
Loaded Mass
Do not push with casters
locked or blocked to prevent
tipping
Located on Rating Label
Located on Rating Label
Located on Rating Label
Located on Rating Label
Located on Rating Label
Located on Rating Label – Indicates equipment mass including
working load
Located on Rating Label
4 of 128
Application

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Itw6l

Tabla de contenido