Symbols Used In The Manual - Crown CT20101-18 Manual Original

• Certain elements of the tool (for example, cutting
unit, parts of the engine, etc�) get very hot during
operation - don't touch them before they cool down�
• Keep the tool in a place protected from moisture
and not accessible for children, always remove the cap
from the spark plug.
• If you plan not to use the tool for a long time, be
sure to drain the oil and fuel tank of and to remove
the chain blade and the saw chain and store them
wrapped in oiled paper�

Symbols used in the manual

Following symbols are used in the operation
manual, please remember their meanings� Correct
interpretation of the symbols will allow correct and safe
use of the tool�
Symbol Meaning
Serial number sticker:
CT ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Read all safety regulations
and instructions�
Wear:
• helmet;
• safety goggles;
• ear protectors�
Wear a dust mask.
Wear dense texture clothes
and rugged footwear with
non-slip soles�
Do not work in rain or snow.
Movement direction�
Rotation direction�
Locked.
Unlocked.
Symbol
English
15
Meaning
Prohibited�
Increase / decrease the
chain tension�
Increase / decrease in the
quantity of chain lubrication�
Adding fuel mixture�
Adding oil for lubricating of
the saw chain�
It is forbidden to be in the
danger zone.
Always hold both handles of
the tool with both hands�
Never operate the tool with
one hand�
Beware of the kickback.
Attention. Important.
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards.
Useful information�
Wear protective gloves�