Parts Identification; Operating Your Dehumidifier; Set Unit Upright; Positioning A Dehumidifier - Dri-Eaz LGR 7000XLi Manual Para El Usuario

PARTS IDENTIFICATION

FIG. A: FRONT
FIG. C: POWER
ATTACHMENT POINT

OPERATING YOUR DEHUMIDIFIER

Set unit upright

NOTICE: Transporting or storing the unit in a
horizontal position is not recommended. When the
machine is placed in a horizontal position, the oil
from the compressor can flow into the refrigerant
coils and reduce the ability of the dehumidifier to
function and possibly damage the unit. If the unit
has been placed in a horizontal position, set it
upright and let it stand for at least 30 minutes before
turning it on.
07-01776F 2015-02 F412 (115V) Warranty 07-00420
Humid air inlet.
Integrated handle.
3M™ HAF filter.
Folds for storage.
Molded pocket
for cord storage.
Process
(dehumidified) air
Control panel.
outlet. May be used
with standard 12 in.
rigid or layflat
ducting.
Back panel. Remove to
access the pump.
Power cord socket.
2
FIG. B: REAR
Product label and
serial number.

Positioning a Dehumidifier

For best results, operate your dehumidifiers in an
enclosed area. Close all doors and windows that open to
the outside to maximize the unit's water removal
efficiency. Place your dehumidifier away from
obstructions, and keep it away from anything that could
block airflow into and out of the unit. For more
information about creating an optimum drying
environment, contact Dri-Eaz at 800-932-3030.
Drain hose
pocket.
Drain hose
outlet.
Dri-Eaz Products, Inc.