Door adjustment
After re-installing the oven doors, make sure the oven doors are parallel and flush. There
are 2 bolts around the Steam oven, under the each door hinge. The lower two bolts help
adjust the door up and down.
Install_NX9900R_PRORANGE_DOP36M96_DA_DG68-01106C-02_EN+MES+CFR.indb 43
Lifting hinge latch up
Adjust the door up and down
1. Remove the door and remove
2 screws on door hinge latch.
2. Turn the bolt under each door hinge
latch.
3. After adjusting the door hinge latch,
fasten the 2 screws again.
4. Re install the door.
NOTE
Lifting the door hinge latch too much will
make it hard to fasten the two screws.
Make sure the door hinge latch is firmly
fixed after adjustment.
English 43
2019-08-13
6:30:54