Frequency Menu - AKG WMS 4000 Modo De Empleo

3 Setting Up

3.6.2 Frequency Menu

20
1. To move from the Preset to the Frequency menu, turn the jog switch briefly to the left. The display will
change like this:
2. To increase the frequency by 25 kHz, turn the jog switch briefly to the right.
To decrease the frequency by 25 kHz, turn the jog switch briefly to the left.
3. Having set the desired frequency, push the jog switch briefly. This brings up the following screen:
4a If you want to save the selected frequency, push the jog switch briefly. Your setting will be saved in
memory and the display will change as follows:
4b If you'd rather not save the selected frequency, briefly turn the jog switch to the left or right.
This brings up the following screen:
- Push the jog switch briefly. The transmitter will stay tuned to the original frequency and the display will
revert to the following screen:
- You can now go on to set the input gain referring to section 3.8 or switch the transmitter to LOCK
mode.