Activation After Selecting The Programme; Reset Programmsetting; Quick Start; Pause/Cancel - Caso MIG 25 Ceramic Manual Del Usuario


Close doors
Close the door until the door latch audibly locks in place. If a current cooking programme
was interrupted as a result of opening the door, the current cooking programme will be
continued after pressing the control dial.

13.5 Activation after selecting the programme

After selecting the program, press the control dial to start the preset cooking programme.

13.6 Reset programmsetting

If needed , press Stop/Delete once to reset the settings of the device.

13.7 Quick start

Utilise this function to programme the oven for comfortable cooking at 100% microwave
performance.
Press the control dial in quick sequence to set the cooking time (max 10 minutes). The
oven starts automatically after 2 seconds.

13.8 Pause/Cancel

In order to interrupt an ongoing cooking programme, you can proceed as follows:
Press the Stop/Delete button once. The cooking programme that is in use will be stopped.
Or:
Open the door of the device. The cooking programme that is in use will be stopped.
Please note
► To continue the interrupted cooking program, press the control dial after closing the
door.
To terminate the interrupted program, press the button Stop/Delete a second time.

13.9 Setting the clock

To set the clock on the device, proceed as follows:
Press the button Clock to switch the oven from the 24 hour system to the 12 hour system.
For example you want to set the clock to 8:30.
Press the button Clock to switch the oven from the 24 hour system to the 12 hour system.
Turn the control dial Time/Menu until the correct hour is displayed.
Press the Clock button to save the set hour.
Turn the control dial Time/Menu until the correct minute is displayed.
Press the Clock button to save the set time.
59