Non-Stick Coating - Gastroback Design Sandwichmaker Instrucciones De Funcionamiento

• Always leave the appliance and all its parts cool down before
moving and cleaning the appliance. Do not place the appliance on
heat-sensitive surfaces, while the appliance is hot. Always ensure that
the heating plates are completely empty, before tilting or moving the
appliance or storing the appliance to the upright position.

NON-STICK COATING

The heating plates of your DESIGN SANDWICHMAKER are provided
with a high quality non-stick coating. Therefore, food can be removed
from the heating plates easily. Please adhere to the following precautions:
• Before first use: wipe the non-stick coatings of the heating plates with
a little cooking oil. Thereafter, there is no need to add any further oil
for cooking.
• Do not use the appliance, when the non-stick coating is scratched,
cracked or detached due to overheating.
• Only use wooden or heat-resistant plastic cooking utensils with the
appliance. Do not use any hard or sharp-edged objects. We will not
be liable for damage to the non-stick coating, if unsuited utensils or
similar objects have been used (e.g. metal barbecue utensils, metal
scourers, wire brushes).
• Do not use any oven cleaner or spray-on non-stick coatings with the
appliance.
EN
40