Tape Margin Function - Brother P-touch 2200 Guía De Usuario

The Tape margin function allows you to adjust the size of the margins on the left and right
sides of your text.
The default tape margin setting is FULL; however, three other settings are also available.
FULL
(1" (25 mm margins))
NONE
(1/6" (4 mm margins)
NARROW
(1/3" (8 mm margins))
MEDIUM
(1/2" (12 mm margins))
After printing using the NONE, NARROW and MEDIUM tape margin settings, and the
tape is automatically cut off, use scissors to cut along the cutting guide (:) to center the
text within the label.
To change the tape margin setting:
1 While holding down
current tape margin setting.
2 While still holding down
ting is displayed.
3 Release

TAPE MARGIN FUNCTION

, press
, continue pressing
to apply the selected tape margin setting to the entire text.
Tape
once, and keep
Tape
held down to display the
until the desired tape margin set-
59