Memory Functions - Brother P-touch 2200 Guía De Usuario

You can use the memory to store your most frequently used text files. The text remains in the
memory, even after all characters are removed from the display using the Clear function (hold-
ing down and pressing
When each file is stored, it is given a number to make recalling it easier. Up to 9 text files or
about 300 characters can be stored in the memory. Each stored text file can have a maximum
of 99 characters.
Since a copy of the stored text file is recalled when the Recall function is used, the text can be
edited or printed without changing the originally stored file. When a file is no longer needed or
more space is necessary, the Memory delete function can be used to delete it.
When inserting new batteries, be sure to insert the new ones within five minutes of
removing the old ones, otherwise any text files stored in the memory will be lost (unless
the machine is plugged into an electrical outlet with the AC adaptor).
STORING TEXT
To store a text file:
1 Hold down
display.
If 300 characters have already been stored, the error message "MEMORY FULL!"
appears in the display. If this occurs, an existing text file must be deleted before the
new one can be stored.
2 Press the key (
is stored under the selected file number and the text previously shown in the display reap-
pears.
If a file is already stored under the selected file number, the message "OVER-
WRITE?" appears in the display and you must decide whether or not to overwrite it
(delete it from the memory and store the new one).
To quit the Store function without storing the text, hold down
Store
(or press just

MEMORY FUNCTIONS

Clear
).
Store
and press
Font
M.Del
to ) of the file number where you wish to store the text. The text
Clear
).
. The message "STORE SELECT 1–9?" appears on the
and press
71