Using The Pouring Shield; Important - KitchenAid KSM7581 Instrucciones Y Recetas

Attaching the Pouring Shield
1. Make sure the speed control lever
is set to the OFF/0 position.
2. Unplug the Stand Mixer.
3. Attach desired accessory and raise
the mixing bowl.
4. Slide pouring shield collar around
beater shaft, centering collar over
rim of bowl.

Using the Pouring Shield*

Pour ingredients into the mixing
bowl through the chute portion of
shield.
IMPORTANT: Make sure the guides
on the bottom of the chute rest
on the rim of the bowl to keep
ingredients from falling outside
the bowl as they are added.
*Included with some models.
10
Using the Pouring Shield*
Removing the Pouring Shield
1. Make sure the speed control lever
is set to the OFF/0 position.
2. Unplug the Stand Mixer.
3. Slide the pouring shield off the
bowl.
4. Lower the bowl support by turning
the bowl-lift lever down.
5. Remove accessory and the mixing
bowl.
Cleaning the Pouring Shield
Wash in warm, sudsy water. If you
wish, you may place on the top rack
of your dishwasher.
Pouring Chute