REMOVAL FROM STORAGE
1. Uncover and clean the motorcycle.
2. Change the engine oil if more than 4
months have passed since the start of
storage.
3. Charge the battery as required. Install
the battery.
4. Drain any excess aerosol rust-inhibiting
oil from the fuel tank. Fill the fuel tank
with fresh petrol.
5. Check the final drive oil, adding the
recommended gear oil if necessary.
If necessary, change the final drive oil
as specified by the Maintenance
Schedule.
6. Perform all Pre-ride Inspection checks
(page 70).
Test ride the motorcycle at low speeds
in a safe riding area away from traffic.
E
133