Sony HANDYCAM HDR-TG5 Guía De Operaciónes página 14

the bottom.
The /CHG (charge) lamp lights up and charging starts. When the /CHG (charge) lamp
turns off, the battery is fully charged.
See page 61 on charging, recording and playing time.

When your camcorder is on, you can check the approximate amount of remaining battery power with the

remaining battery indicator at the upper left on the LCD screen.
When inserting the camcorder into the "Handycam" Station Cradle, close the DC IN jack cover.

Disconnect the AC Adaptor from the DC IN jack holding both the "Handycam" Station Cradle and the

DC plug.
To remove your camcorder from the "Handycam" Station Cradle
Close the LCD panel, then remove the camcorder from the "Handycam" Station Cradle
holding both your camcorder and the "Handycam" Station Cradle.
To charge the battery pack using only the AC Adaptor
Close the LCD panel with your camcorder turns off, then connect the AC Adaptor to the DC
IN jack on your camcorder.
US
14
DC IN jack
Open the jack cover
DC plug
With the  mark on the bottom