(movie)/
(Photo) lamps (16)
START/STOP button (18)
Power zoom lever (18, 20, 24)
PHOTO button (20)
GPS switch (HDR-TG5V)
RESET button
Press RESET to initialize all the settings
including the clock setting.
BATT (battery) release lever
Battery pack
"Memory Stick Duo" media slot (46)
Access lamp (Internal memory, "Memory
Stick PRO Duo" media) (46)
While the lamp is lit or flashing, the
camcorder is reading or writing data.
DC IN jack (13, 14)
A/V Remote Connector (25)
Hook for wrist strap
Attach the strap (supplied) and place your
hand through the loop to prevent the
camcorder from damage by being dropped.
Tripod receptacle
Attach a tripod (sold separately) to the
tripod receptacle using a tripod screw (sold
separately: the length of the screw must be less
than 5.5 mm (7/32 in.)).
Interface connector
Connects your camcorder to the "Handycam"
Station Cradle or the Dedicated USB Terminal
Adaptor.
By attaching the Dedicated USB Terminal
Adaptor, you can connect the USB cable
to your camcorder without using the
"Handycam" Station Cradle.
USB cable
Depending on when or where you use the
camcorder, attach the Dedicated USB Terminal
Adaptor to either the long or the short cable.
Be careful not to hang or give strong impact
to the adaptor or the cable. It may become
damaged.
Attach the USB adaptor cap on the USB cable
when carrying it in bags, etc.
Dedicated
USB Terminal
Adaptor
US
5