Scotsman SCE275 Indicaciones Para El Uso página 4

The ice machine is not designed for outdoor use. It must
be installed indoors, in a controlled environment. The air
and water temperatures must not exceed rated limits.
Electrical power is supplied through a cord connected to
the unit. All local codes must be followed.
Pre-installation:
1. Inspect the place where the ice machine is to be
installed. Check for:
•
space for the cabinet,
•
water supply,
•
drain availability
•
and electrical power supply
reach of the machine's power
No extension cords are allowed. The building drain inlet
must be lower than the drain outlet(s) at the back of the
ice machine. The water supply must have a hand shut off
valve accessible when the unit is installed.
2. Determine the method of installation, is the machine
to be installed under the counter? Is the drain in the floor
under the machine? Is the water inlet valve accessible?
connection within
cord.
Remove Material Located Between Cube Deflector and Troughs
Unpack and Assemble
1. Remove legs and scoop from storage bin.
2. Remove shipping materials from ice making area.
3. Place corner posts from the shipping carton on the
floor behind the ice machine. Tip the ice machine on its
back and remove the shipping skid.
4. Screw the legs into the threaded holes in the base of
the ice machine.
5. Tip the ice machine back to an upright position.
4