Shark GS300 Guia Del Usuario página 5

ASSEMBLY
1 Remove all packaging from the
appliance. Do not plug in or turn
on until assembly is complete.
2 Set the base on the floor. Insert
the telescoping pole into the
base.Turn the pole connector
clockwiseto secure to the base.
(fig. 1)
3 Attach the steam nozzle cradle
to the top of the telescoping pole
and secure by gently pressing
down on the cradle to lock into
place. The garment hook should
be facing away from the front of
the base. (fig. 2)
GS300_IB_ENG_SPA_101110.indd 5
fig. 2
fig. 1
fig. 3
4 Attach the steam unit to the base.
Pull the release button on the
front of the base towards you.
Secure the back of the steam unit
into the base first, lining up the
notch on the back of the steam
unit into the groove on the base.
Then lock the front of the steam
unit into the base. (fig. 3)
5 Secure the steam hose to the
steam unit. Align the hose with
the notch on the steam unit and
turn the connector clockwise to
secure the hose to the steamer.
(fig. 4)
fig. 4
6 Hang the steam nozzle on the
steam nozzle cradle. Secure the
steam nozzle in place by using
the safety strap, loop the strap
around the handle of the steam
nozzle and secure in the groove
on the opposite side.
7 Adjust the telescoping pole to the
desired height by unlocking the
three latches one by one. Unlock
the latch and extend the pole to
the appropriate height, then lock
the latch back in place to secure
at that height.
www.sharkclean.com
10-11-11 9:58 AM
ENGLISH
5