Drain Connection - Alliance Laundry Systems UM202 Serie Manual Del Usuario

Installation

Drain Connection

Figure 6 shows plumbing for UM machines.
A flexible connection must be made to a vented drain
system to prevent damage to rigid drain pipes. Drain
should be vented to ensure proper flow and prevent
siphoning. If proper drain size is not available or
1 15 Amp – Three-Phase Circuit Breaker
2 3/4 in. Water Outlet
3 3/4 in. min. Cold Water Supply Line
4 3/4 in. min. Hot Water Supply Line
14 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
practical, a surge tank is required. A surge tank along
with a sump pump should be used when gravity
drainage is not possible, such as in below-ground-level
installations.
Refer to General Specifications and Table 6 for drain
information.
5 60 in. Required for 202
6 2 in. min. Waste Line Tee
7 4 in. min. Waste Line
Figure 6
Y043I
F232212