Operating Instructions - Alliance Laundry Systems UM202 Serie Manual Del Usuario

Operation

Operating Instructions

1. Turn on the main power source (circuit breaker).
2. Close drain of wash compartment to be used.
Refer to Figure 10.
Figure 10
3. Select desired temperature and water level.
Figure 11
4. Add detergent and bleach, if desired, to water.
Use ONLY liquid bleach.
5. Set wash timer for 30 seconds to begin filling tub
and allow detergent/bleach to mix.
18
CAR12N
CAR13N
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
6. Place washables in compartment. Distribute
evenly around agitator. Refer to Figure 12.
Figure 12
NOTE: Place stringy items such as mop heads in
laundry net to prevent blockage of drains.
CAR14N
F232212