Daily Preventive Maintenance Checklist - Alliance Laundry Systems SF18VNV Instalación/Mantenimiento

Maintenance
Machine ____________________________
Operator ___________________________
Beginning of Day
1. Inspect water inlet valve hose connections on the back of
the machine for leaks.
2. Inspect steam hose connections for leaks, where
applicable.
3. Verify that insulation is intact on all external wires and
that all connections are secure.
4. Inspect door lock and interlock before starting operation:
a. Attempt to start the washer with door open.
b. Close the door without locking it and attempt to start
the washer.
c. Close and lock the door, start a cycle, and attempt to
open the door while the cycle is in progress.
1. Clean the AC drive box filter.
2. Clean the door gasket of all foreign matter.
3. Clean automatic supply dispenser and lid.
4. Clean the washer's top, front, and side panels.
5. Leave loading door open at the end of each day to allow
moisture to evaporate.
6.
Note: Unload the machine promptly after each completed cycle to prevent moisture buildup.
Note: Leave loading door open after each completed cycle to allow moisture to evaporate.
Note: Improper replacement of the AC drive box filter will result in clogging of the pump.
38

Daily Preventive Maintenance Checklist

Checks
Observe All Safety Warnings!
End of Day
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Week of: ________________
Days
1 2 3 4 5 6 7
F232060