EB TECHNOLOGY START-S4XL Manual De Instrucciones página 24

START-S4XL
2.3 Connection of the FLASHING LIGHT 230 Vac
4 5 6
Flashing light complete
with intermittence circuit board
2.4 Connection of one 24V gate open and moving LIGHT
29 30 31
2.5 Connection of the COURTESY light
4 5 6
2.6 Power supply of the ACCESSORIES
Below the layout of the connection for a correct power supply of the accessories. Keep in mind that between the
clamps from no.19 to no. 29 there is a tension of 12 Vac.
12 13 14 15 16 17 18 19 20 21 22 23
Terminal board 18-19
Voltage: 24 Vac
Maximum current: 300 mA
26 27
LIGHT
230 Vac
23 24 25
4 5 6
Flashing light complete without
!
intermittence circuit board
If you are expecting to use for a 24V light,
you can't use this connection.
!
If you are expecting to use a signal light,
you can't use this connection.
ON
1 2 3 4 5
Terminal board 19-29
Voltage: 12 Vac
Maximum current: 600 mA
-6-
26 27
DIP 9
CTS
ON Fix Light
6 7 8 9 10
DIP 4 - ON
ON
1 2 3 4 5
28 29 30 31
Terminal board 30-31
Voltage: 24 Vdc
Maximum current: 100 mA
Technical Manual
CTS
6 7 8 9 10