EB TECHNOLOGY START-S4XL Manual De Instrucciones página 28

START-S4XL
4 Adjust of FORCE, DESPLACEMENT and SLOWDOWN
60
40 80
20 100
FORZA
Adjust of the force of the
motor. From 20% up to
100%
5 Functions and adjustments
Setting up with DIP A
ON CTS
2 3 4 6 7 8 10
1 5 9
ON CTS
1 2 3 4 5 6 7 8 9 10
ON CTS
1 2 3 4 5 6 7 8 9 10
ON CTS
1 2 3 4 5 6 7 8 9 10
ON CTS
1 2 3 4 5 6 7 8 9
ON CTS
2 3 4 6 7 8
1 5 9
ON CTS
1 2 3 4 5 6 7 8 9
ON CTS
1 2 3 4 5 6 7 8 9 10
ON CTS
1 2 3 4 5 6 7 8 9 10
ON CTS
2 3 4 6 7 8
1 5 9
ON CTS
1 2 3 4 5 6 7 8 9
ON CTS
1 2 3 4 5 6 7 8 9
4
2
0
Desplacement time open and close,
from minimum \ sec and if you ad-
just at the maximum power, the sec-
ond leaf will start when the fi rst leaf
has fi nished the working time. When
adjusted it will work at the next ma-
noeuvre (0 - MAX)
1-OFF
Automatic 1
2-OFF
1-ON
Condominium
2-OFF
1-OFF Semi
automatic
2-ON
1-ON
Automatic 2
2-ON
Reversing
3-ON
stroke
10
Courtesy
4-ON
light
10
Pre-lighting
5-ON
10
Crossing
6-ON
detector
7-ON Lamp in pause The lamp is working in the pause time, too.
Phototest
8-ON
10
9-ON Fix light
10
Programming
10-ON
time advanced
10
6
8
10
MAX
T.SFAS
By every order it inverts: open and close.
It closes automatically at the end of the pause time
In opening and pause time it doesn't accept commands.
It re-closes automatically at the end of the pause time.
By every command it follows the procedure open-stop-
close-stop-open etc. It doesn't re-close automatically
By every command it follows open-stop-close-stop-open
etc. It recloses automatically at the end of the pause time
This function starts a closing thrust at the beginning or at the
end of the manoeuvre to make easy the work of the elec-
tronical lock.
In the output of the terminal board 4 and 5 there is tension
at the beginning of the opening till 2 minutes before closing,
useful to power the courtesy light.
It ables the pre-lighting before each manouevre.
As the photocells detect a crossing, the control board opens
completely then closes but 1 sec. before according to the
pause time, when the obstacle is gone.
Activates the phototest (in presence of TRANSCEIVER, see
Chap no. 3)
The output of the lamp indicating the opening gate is fi x
instead of fl ashing.
It activates the time learning with an advanced system (see
Chapter no. 8.2)
-10-
4
2
MIN
V.RALL
Speed of slow down (MINIMUM OFF)
For the majority of the motors the best
value is from Min up to 4. You need to
adjust a speed of 1/3 of the motor speed.
To deactivate the slow down adjust the
trimmer in OFF position.
Technical Manual
6
8
10
OFF